Folk Art Enamels Gloss

Get a PC that doesn’t look like it came off a PC Hypermart Shelf

When someone says ‘mods’ or ‘modeling’ to you, you probably think one of two things: A neon-lit, willy-waving offence to all that’s good and virtuous, or an amateur craftsman possessing a skill with a Dremel and a soldering iron such as you could never even dream of.

 

Both things, to a certain extent, are true. A great deal of moddingdom does, it must be said, transcend traditional ideas of taste and decency in favor of looking like the sort of garish monstrosity you’d find parked in Dublin on a Saturday night. What you have to bear in mind is that, just because such case mods tend to get shown off the most, they’re not the be all and end all of the form. There’s a silent army of stylish, subtle mods out there, tailored to match the living room decor or sit sleekly next to an AV system. Case modding doesn’t have hard and fast rules – it’s about tailoring your PC to look the way you want it to. If that so happens to involve it appearing as though you’ve just ram-raided Autostyle, so be it.

 

To address the other stereotype, it’s also true that making a really epic case mod requires a fearsome degree of time, patience and experience. However, a total overhaul may not necessarily be what you’re after. A great many case mods involve just changing one or two specific things: for instance improving airflow, adding a side window or etching a pattern onto the side. A softly-softly approach has very little for a total newbie to fear.

The exact origins of case modding are lost to history – you could argue people applying Duran Duran stickers to their Spectrums or spray-painting their Armigas counts towards it – but there are certain flashpoints, defining moments that led to its creation. Modding’s about two things: aesthetics and performance. In the case of the former, it grew out of the late 1990′s sharp growth in overclocking that resulted from the PC’s growing clout as a gaming platform.

 

People seeking more power out of their processors and graphics cards meant the components generated more heat, and in turn there was a need for extra cooling. Case mods for this purpose leant towards the functional, not the beautiful – mounts for fans, extra vents, fan speed controllers… De rigueur these days, but even a fitting for a single extra fan was crazy-talk for a mass-produced PC case back in 1997 or so. They may not have been pretty (they were often noisy to boot) but they led to the realization that a PC case was not an immutable object. It was a blank canvas, on which any design could be painted.

 

Mod Emergence

 

In vague tandem to this was the increasing mocking the traditional, dreary beige box case was being subjected to, culminating in the release of Apple’s lurid but attention-grabbing iMac. All that translucent, candy-colored plastic is slightly risible by today’s understated, mono-hued standards, but in 1998 it was like the first kid in school to get their ears pierced. Everyone wanted to copy it – and case modders moved faster than production lines did. There was this sudden awareness that the home computer could be a visual centerpiece to a room, not a dirty secret shoved underneath a table. Key to this was that the iMac’s innards were partially on show, which bolstered the concept of celebrating PCs circuitry – most especially in the case of performance hardware. In other words, windows.

 

In many ways, a transparent side panel is the de facto case mod, to the point that a vast number of retail cases include one already. Irrespective, it remains one of the more satisfying and straightforward case mods for a first-timer. Pre-cut glass or acrylic windows are available from online case modding stores, so it’s mostly a matter of sizing up and then cutting a dirty great hole in your case’s side panel. Not quite as simple as it sounds, granted, but it’s great for that ‘I made this’ feeling, and it’s a form of modding that doesn’t immediately make your PC look like it’s from Glassgow. Beyond that are a thousand visual modifications of color and form. It’s no coincidence that the rise of modding went hand-in-hand with the rise of home internet – budding modders were able to share their creations with similarly minded folks, offering and seeking inspiration and advice at sites like hardocp and virtual-hideout.

 

What began as individual experimentation grew into a huge community that in turn birthed standardization of parts and techniques – and plenty of good-natured competition. In due course, online stores sprang up to service this community, and as a result the bread and butter components of modding – tubing, lighting fans, front-mounted ports and displays, and even down to colored molex plugs and thumbscrews – are now easily and cheaply available. Contrast that with a decade ago, when fitting a fan or a light involved soldering and rewiring to connect it to your PC’s power supply. Now such trinkets come with plug-and-play Molexs built-in, making installation a no-brainer.

 

Similarly, case fans are now standardized shapes and sizes, matching up neatly with the mounting points inside most PC cases, while most light fittings now come with Velcro or sticky back plastic for instant application. Between that and the sheer ubiquity of carved and sliced PC shells, we’re now at the point where imagination is the major inhibiting factor to a great case mod.

 

Which leads us neatly to a third contributing factor to the scene – fanboyism. If you want to stand out from the crowd, any amount of neon strip lighting isn’t going to get you noticed anymore, but a one-of-a-kind tribute to your favorite game or movie really will. The internet makes being a colossal Star Wars or Half-Life geek entirely acceptable, which is why we’ve seen PCs built inside R2D25, scale models of Futuromo’s Bender and designed to look like Citadel 17. Clearly, this kind of stuff is a step beyond, involving a degree of craftsmanship as well as familiarity with the tools, plus isn’t always ideal for the practicalities of running and upgrading a gaming PC. Something like a themed paint job or a carefully-etched logo is an achievable compromise.

 

Mod to Trot

 

Let’s rewind a little to look at the nuts n bolts basics of modding. Say, for instance, your system is regularly overheating, you’re out of fan mount points and water cooling sounds like the devil’s work – what do you do? Clearly, you need to either blow additional cold air into the case or suck warm air out of it. Either way, you need an extra fan. In the simplest terms, fitting this involves measuring the diameter of the fan blades and cutting a hole to suit (just don’t cut the hole to suit the square frame of the fan, or you won’t have left any area to attach the thing to.) There are various ways to make the cut – a jigsaw, a rotary saw or a holesaw. The latter’s the most preferable in this instance – it’s a drillbit that cuts out a perfect circle, so there’s minimal risk of ending up with a hole that looks like an egg drawn by Picasso after he’d had one too many triple-espressos. Presuming you’re wanting to install a standard 80mm fan, you’ll need a holesaw blade that’s 76mm across -clearly, larger fans need larger holesaws.

 

Tooling Up

 

You’ll also need a work bench, a few clamps and a chunky bit of wood you don’t need for anything else that you can pop underneath the casing as you cut into it. This is messy, fiddly business, and you don’t want to end up with a coffee table covered in circular scars, or a severed finger. The backing board also prevents the case from bending and distorting as you inflict the wrath of mod upon it. None of this is expensive kit, but its well worth having a decent, semi-permanent setup in your garage or workshop, if case modding’s something you intend to embark on regularly. Press the holesaw down firmly and gradually – it doesn’t need to be spinning especially fast, and you should rest for a few seconds if it starts to feel crazy-hot.

 

Once you’re done, the first thing you’ll notice is that the wound isn’t a clean one. The new hole will be inescapably raggedy-edged and running a finger along it will make your skin cry salty red tears, so don’t do that. This is where, arguably the most archetypal case modding tool comes into play – the hallowed Dremel (or equivalent rotary tool – Dremel’s simply the best-known brand). A Dremel’s a small, low power electric drill, though rather than carving enormous holes, it’s more designed for polishing and sanding and etching by means of small, precise fittings. To smooth out your circle, you want the sanding drum bit – move it gradually around the edge from the unpainted (i.e. inside) side of the case. This’ll get rid of all those deadly sticky-bits, but you’ll need to manually sand or take some steel wool to the cut to make it perfectly smooth.

 

Now you’ve made your hole, you’ve two options when it comes to actually fitting the fan, and they neatly sum up the essential dichotomy around case modding – aesthetics or practicality. In the case of the latter, you can simply measure up and pencil-mark the fan’s four corner holes on the underside of the case, then drill ‘em, drop some bolts through (they should have been supplied with the fan) and Bob’s your uncle.

 

For the former, a more elaborate approach is required. Well, mostly glue. A two-part, metal-bonding epoxy is what you need, and for maximum purdiness you should pick up a fan grille too – you can find all this kit at any decent online case modding store. Lay the grille on top of the fan, drop the bolts through each of the corners, and apply the epoxy to the bolts’ flat heads. Align the fan-grille array with the hole in your case, and stick the bolt heads to its underside. Then, affix some nuts and washers underneath the fan to hold it in place, and you’ve got yourself a stealth blowhole, with no ugly screw heads visible on the outside of the case. Hardly the be all and end all of modding, but this fairly quick n easy tweak does comprise many of the art’s core principles. The same tools will cut holes to run water cooling pipes through, or create fittings to add carrying handles to the case, or etch a design onto its side, or create openings for front-mounted USB ports.

 

Alternatively, you could just buy a high-end case with a crap load of fan mountings. Standardized parts could be said to be taking the fun out of case-modding, but on the other hand they add a modular ease to designing a custom case. You could do something as simple as swapping out your PC’s pre-fitted fans with LED-enhanced jobbies, and already you’ve got yourself a system that no longer looks like it came straight off a PCHyper Global Mega Mart shelf.

 

If you don’t want to go down the boy racer route, perhaps your best option is painting. Whether it’s simple re-coloring or an elaborate design of your own, it’ll transform a metallic monolith into an item of pride, not shame. Car spray paint will do the trick, but be aware you’ll need a primer as well as the paint – and don’t mix lacquer and enamel paint and primer. Pick one and stick to it. If your case already sports its own paint job, you’ll need to sand that sucker down first (which will likely involve dismantling the case into as flat pieces as much as possible). Removing the entirety of the paint isn’t necessary, but you need to get rid of its texture. For this, you’ll need some fairly heavy-duty sandpaper – 220 grit wet/dry, most likely.

 

Sand in just one direction, and ease off if you start to hit metal. You’ll then need to move to a finer grain paper to smooth the surface off. Patience is vital – a visible scratch will stick out like a sore, gangrenous thumb come the painting and the primer’s unlikely to fill it.

 

You’ll also need to clean off the case before you start painting, as fingerprint grease and metal or paint crumbs will foul things up significantly. A spray can of air will get rid of the dust, and a quick rinse followed by a dry cloth rub will sort the grease. Then, it’s primer time. The secret to this is multiple, very thin coats until the entire surface is evenly covered. Edges and areas where you’ve got a little too enthusiastic with the sandpaper may require a little more focus. Once the primer’s dried, you’ll want to go over it with a very fine (400 grit) sandpaper to smooth it off, and then you can essentially repeat the process with your paint of choice.

 

You could stop there and have a pretty decent-looking case, but, as tends to be the case with modding in general, there are levels yet beyond if you’re in search of perfection. Specifically, a finish sanding with an even finer paper, followed by another color coat, followed by a clear coat to add gloss, followed by a rubbing compound to showroom-it-up. Each coat of paint can require a day or two to dry, and the total number of hours of sanding involved can approach double figures – it’s a long job. Making something that looks decent or fixes problems like poor airflow or cluttered cabling is straightforward, but creating something unique is very much a different matter. You’ll need to plan it minutely, measuring up every part and planned change, and not just plough on in and make it up as you go along.

 

Be prepared to trash cases, spill a bit of blood and accrue a vast collection of specific tools. Of course, with all that comes an enormous sense of pride – you’re no longer a mere consumer. You’re a craftsman.

The Van Rensselear Children Portrait 1840 antique oil painting ! Folk art $24,900.00

Antique Pair of Iconic American Folk Art Carved Pine Wood Eagle Sculpture – RARE $20,000.00

Metal Art Sculpture Sculptor for Hire Travel Design fabricate install folk art ! $20,000.00

Mamie Falk Folk Art Oil Painting – Considered Minnesota’s “Grandma Moses” $19,750.00

Yuri Gorbachev ORIGINAL Landscape Oil painting Folk Art $17,500.00

Folk Art wood statue of Grover Cleveland 1894 $9,500.00

Antique Ship Captain Folk Art Carved Coconut Chalice $8,500.00

Original Oil On Canvas Painting by Minni Hines Bayou Scene Folk Art 24×48 $8,495.75

Chinese folk art sculpture carving stone inkstone for painting and handwriting $6,890.00

Chinese handcraft folk art stone sculpture carving inkstone inkslab fly dragon $6,329.00

Banjo Boy/ Pre-Civil War Folk Art on Linen $6,000.00

LARGE Antique Americana Folk Art Painting of Boy -Civil War Col. Orlando H Moore $5,999.99

Yuri Gorbachev Original Oil Painting Russian Art Folk $5,990.00

Chinese handcraft folk art sculpture carving inkstone inkslab—Avalokitesvara $5,590.00

AMERICAN FOLK ART PUPPET THEATRE QUEENS,NY $5,000.00

Clementine Hunter Signed Framed Folk Art Painting Cotton Pickin’ c1977 20×26.25 $5,000.00

vincent van gogh sculpture outsider folk art Dale Teachout assemblage junk $5,000.00

Bessie Harvey Folk Art Found Object Museum Piece!!! $5,000.00

PAIR OF 19TH C FOLK ART PORTRAITS PAINTINGS SIGNED P MARTIN 1886 HUSBAND & WIFE $4,999.99

ANTIQUE 19th CENTURY AMERICAN FOLK ART ETCHED GLASS ALLEGHENY CTY PA GERMAN WOW $4,999.99

ANTIQUE 19th CENTURY AMERICAN FOLK ART FISH HOOK MASSIVE IRON TRADE SIGN $4,999.99

Signed OLD master GESSO FRAME OIL ON CANVAS PORTRAIT NELSON pipe Folk art $4,999.00

Clementine Hunter Folk Art Painting Signed “Picking Cotton” $4,850.00

Chinese folk art sculpture carving stone inkstone double dragon holding the sun $4,690.00

FOLK ART OIL PAINTING PORTRAIT CHILD ICONIC RED DRESS PRINCE CHARLES SPANIEL $4,500.00

Corbels Pair Wood Winged Griffins Victorian Old Paint Architectural Folk Art $4,500.00

FOLK ART PAINTING SULLIVAN COUNTY NEW YORK J R GEROW $4,500.00

Exceptional Folk Art Painting $4,500.00

Johnnie Swearingen! Great Folk Art!!! Peddling Melons $4,500.00

New England Folk Art Portrait on Canvas Ca.1830 $4,500.00

Clementine Hunter Signed Framed Folk Art Painting Wash Day c1977 19.25 x 23.25in $4,500.00

A Outstanding Early Trade Axe,Folk Art Hatchet, $4,500.00

Yuri Gorbachev Original Oil Painting Russian Art Folk $4,490.00

FANTASTIC FOLK ART CHEST $4,200.00

Clementine Hunter Signed Framed Folk Art Painting African Headdress c1977 25.5h $4,000.00

ANTIQUE MINIATURE PRIMITIVE FOLK ART WOOD RURAL SCENE FRAMED 12 1/4″ UNIQUE $3,885.00

*RARE TRAMP / FOLK ART Shoe Shine Box – Brass/Wood-Detailed-Ornate-Exquisite $3,800.00

Antique KNOTTY Tree Root Twig FOLK ART CHAIR Set GOODY KOONCH West Virginia $3,750.00

Original Mexican Folk Art Icons Retablo:18-19th century $3,650.00

Chinese handcraft folk art sculpture carving inkstone-an old man finshing alone $3,590.00

Folk Art Hand Carved Soldier,6ft Tall Pick Up Only $3,532.50

Unique/Exceptional Large Oval Folk Art Santa Claus Wood Carving signed Cobb 98 $3,500.00

Painting Vintage 50s Cowboy Folk Art Levis Jeans Vinicur Little Buckaroo Parade $3,500.00

Advertising Art / Folk Art / Christmas Hooked Rug – 5′x3 1/2′ $3,500.00

Johnnie Swearingen! Great Folk Art!!! $3,500.00

Chinese handcraft folk art sculpture carving inkstone inkslab—Lofty aspiration $3,490.00

Terrazzo Marble Micro Mosaic Latin Ethnic Musicians Mural Folk Fine Art $3,374.99

Original Mexican Folk Art Icons Retablo:18-19th century $3,250.00

FINE 19c EARLY FOLK ART PORTRAIT PAINTING $3,225.00

Israel Jewish Art,Sara Hagay,Israeli Folk Dance “hora”,Oil,Judaica,Framed $3,000.00

mud painting signed jimmy sudduth a real folk art outsider master piece $3,000.00

ANTIQUE AMERICAN FOLK ART WOOD CANE ISLE ROYALE FIRE WW2 D DAY GI ? KENOSHA WI $2,999.99

FRANK WYSO OUTSIDER FOLK ARTIST PENNSYLVANIA COAL MINERS 4 WORKS OF ART $2,999.99

King’s Couch Rare One of a Kind Yard Art from Chicago Folk Hand Made furniture $2,999.99

ANTIQUE 19th AMERICAN FOLK ART NATURALIST BUFFALO SETON STYLE CATLIN PAINTING $2,999.99

Chinese handcraft folk art sculpture carving inkstone inkslab man walk in forest $2,999.00

Chinese handcraft folk art sculpture carving inkstone inkslab a man watch moon $2,999.00

fine Chinese handcraft folk art stone sculpture carving inkstone inkslab scenery $2,890.00

Temperance Movement Folk Art Painting Folk Art Temperance Painting $2,850.00

Anonymous Folk Art Carving Figure with Crown in Skirt with Snake $2,799.99

ANTIQUE OIL PAINTING FOLK ART NEW ENGLAND ‘HUGES’ 1892 $2,750.00

Chinese handcraft folk art stone sculpture carving inkstone inkslab with dragon $2,690.00

FOLK ART Antique Wood Polychrome Carved Asian Figure Sculpture $2,500.00

HUGE 37″ Antique 19th American Folk Art Carved Gilt Wood Eagle Statue Americana $2,500.00

Antique Primitive Folk Art Hand Carved Wooden Dough Bowl $2,500.00

FOLK ART OIL PAINTING OF THE SS “OCEAN” STEAMSHIP $2,475.00

Ca. 1820 American Folk Art Painting Deformed Man $2,450.00

James Harold Jennings Amazing and Colorful Folk Art! $2,400.00

Doris Lee – Folk Art Painting – Signed and Titled – Original Condition $2,400.00

DC: Prison Folk Art Matchstick Ship, HUGE 5′ Length $2,379.00

Amazing ORIGINAL NAUTICAL AMERICAN FOLK ART PAINTING $2,285.00

Early 20th Century Folk Art Sheep Painting/ Inside Barn $2,250.00

FOLK ART COLLAGE/Presidential Stamp Collage $2,250.00

Folk Art Handmade Ceramic Sculpture Plaque Dentist Pulling Tooth Dicker Vintage $2,200.00

ANTIQUE Americana TRADE SIGN IMMIGRATION FOLK ART NYC ICE CREAM PUSH CART $2,200.00

Ohio Pioneer Abraham Betz 1818 HANDWRITTEN LESSON BOOK with FOLK ART $2,150.00

HAITIAN ART: Vibrant PAINTING, SIGNED by Renowned Folk Artist TOUSSAINT AUGUSTE $2,150.00

Philippines National Artist Abdul Imao Brass Sculpture w/ Base Mindanao Folk Art $2,100.00

Ellen Eilers Calico Country Folk Art Woodcut Ornamental Trees Rare Early Work $2,000.00

ANTIQUE 19th CENTURY AMERICAN FOLK ART FRUIT STILL LIFE WATERMELON OIL PAINTING $1,999.99

ANTIQUE AMERICAN FOLK ART WOOD BALEEN CARVED SPERM WHALE GROTESQUE AMERICANA WOW $1,999.99

ANTIQUE AMERICAN FOLK ART SHIP LIGHTHOUSE LARGE OIL PAINTING GERNAND VERMIER $1,999.99

Vtg Rutherford Tubby Brown Xmas 25″Folk Art Santa Claus $1,999.99

AMERICAN FOLK ART GAMEBOARD TABLE WITH SWASTIKAS $1,999.00

Chinese handcraft folk art sculpture carving inkstone peasant work on his land $1,999.00

LAURA SIQUEIROS “POSEIDONS ADVENTURE” FOLK ART PAINTING $1,999.00

Old Folk Art Cinderella pre Disney & Kincade Beautiful $1,995.00

Clyde Connell 1943 Folk Art hooked rug signed LISTED $1,900.00

ANTIQUE AMERICAN FOLK ART WOOD CARVING TOBACCO CIGAR TRADE SIGN ? DISPLAY WOW $1,899.99

Chinese folk art sculpture carving stone inkstone for painting and handwriting $1,890.00

WELSH AMERICAN SIGNED FOLK ART PAINTING JFK PT 109 $1,850.00

ORIGINAL TEXAS ARTIST FERGUSON OIL PAINTING FOLK ART $1,822.50

C Peterson ORIGINAL modern FOLKART sculpture SIGN ART painted OUT of WORK tools $1,817.00

48x48x1.5″█OIL▀PAINTING█ART█LARGE█BIG█PAINTINGS█FINE█RAW█MALE█REALISM█FOLK_POP█A $1,800.00

American Folk Art Painting of Little Girl Circa 1825 $1,800.00

Emma Schrock Folk Art 16″ by 12″ $1,795.00

c1920 Girl Knitting Folk Woman Antique Art Signed Oil Estate Painting $1,795.00

Folk Art Wood Carving Listed Folk Artist Albert Hoffman $1,750.00

Folk Art New England Oil on Canvas Painting/Circa 1860 $1,750.00

HUTCH TABLE WITH FOLK ART 4 SEASON ARTIST PAINTED TOP $1,750.00